News Updates

What are the precautions for using a waterproofing sprayer?

Release Date:

Nov 23,2021

A waterproofing sprayer is a specialized coating device that employs spray technology. Its operating principle involves controlling the airflow to trigger an instantaneous switch in the air‑turning mechanism, thereby ensuring that the pneumatic motor’s piston performs a stable, continuous reciprocating motion.

　　 Waterproofing sprayer It is a specialized coating device that employs spray technology, operating on the principle of instantaneously controlling airflow to switch the air‑turning mechanism, thereby ensuring the pneumatic motor’s piston performs stable, continuous reciprocating motion.

　　To increase paint intake, paint is conveyed through a high-pressure hose to the spray gun of the sprayer, where it is atomized instantaneously and then applied to the surface of the coated object. The spraying system primarily consists of a supply unit, a spray gun, and an atomization source. It is suitable for industries such as leather handbags, gift packaging, furniture, footwear, and automotive manufacturing.

　　 Waterproofing sprayer What are the precautions?

　　What aspects should be carefully considered when using a waterproofing sprayer during the coating process? The application intervals vary depending on the type of paint. Please note that, according to Wujinshang.com, each paint should be applied separately, employing methods such as brush coating, roller coating, or high-pressure air spraying. Let me provide you with a detailed overview.

　　First, remember to paint.

　　In general, when painting, hardware‑store experts recommend applying coats from top to bottom and side to side, and avoiding excessive paint buildup during the process. When reapplying an anti‑corrosion coating, don’t stretch the brush strokes too far, and make sure the paint isn’t applied too thinly.

　　Second, remember to scroll.

　　Basically, when using that roller to apply paint, we must ensure the paint on the roller is evenly distributed. Moreover, during the painting process, the rolling speed should remain constant and not be too fast.

　　Third, remember high-pressure airless spraying.

　　In fact, this is a relatively fast coating method; according to experts at Hardware Merchant Network, it can also produce a thick paint film. Therefore, in many cases, to better achieve the specified film thickness, it is recommended to use airless spraying.

　　 Waterproofing sprayer What is the maintenance method?

　　1. Maintenance of the spray booth in the waterproofing spray‑coating line. If the air‑supply system of the spray cabinet becomes clogged or accumulates excessive dust, the air filter should be replaced; every three days or so, open the rear of the spray cabinet to clean the oil‑contaminant filtration system. In addition, regularly remove oil buildup from the conveyor chain and apply lubricant.

　　2. Maintenance of the fuel supply system. After use, open the paint return valve to allow all paint to flow back into the ink tank. Remove the ink tank, pour cleaning solvent into the mixer tank, start the pump, and open both the return valve and the spray gun to circulate the cleaning solvent through the tubing, thereby cleaning the spray gun and the oil pump. The pump and spray gun are highly precise; do not disassemble them arbitrarily during cleaning to avoid damage.

　　3. After one week of operation or 50 hours of use, ensure that the mortar pump and cylinder are properly sealed; check the belt tension at the drive unit, verify the tightness and sealing of couplings, and keep the pump’s exterior clean by applying a light oil to prevent dirt from adhering.

　　4. Major components such as the clutch, backflow relief valve, reducer, and air compressor shall be inspected regularly in accordance with operating requirements. If any wear or damage is detected, they should be adjusted or replaced promptly.

　　5. Waterproofing sprayer Before lubricating the mortar mixer, be sure to wipe away any dirt from both the lubrication points and the operator.

What are the advantages of a waterproofing sprayer?

Why is the application efficiency of putty spray machines so high?