General Operating Procedure for a Waterproof Coating Sprayer
Release Date:
Apr 04,2020
As is well known, an increasing number of waterproof coating sprayers are being deployed in construction projects. These machines are easy and convenient to operate—simple to learn, quick to master, and require no frequent repositioning. So, what operational procedures should we follow when using a waterproof coating sprayer?
As is well known, an increasing number of… Waterproof coating sprayer It has already been put into construction work; this type of operation is simple and convenient—easy to learn, quick to master, and requires no back-and-forth movement. So when we use it… Waterproof coating sprayer What operational procedures should be followed at that time?
1. Turn on the power, then press the button to start the screw pump. If the rotation is in the wrong direction, press the stop button to halt it. Adjust the power and reverse the start to change the rotation direction. If the rotation is not reversed, no material will be discharged.
2. Inject a small amount of water at the inlet of the delivery hose, or use a slightly wetter screw pump to prime the hose, then gradually discharge the water through the outlet. The water should remain clean, and no residual water should remain in the pipeline.
3. Tie the air hose and the mortar hose side by side. Connect the air hose to the spray gun.
4. Place the uniformly mixed material into Waterproof coating sprayer In the hopper (can be used with a powder dispenser).
5. Press the Start button to begin spraying. During operation, adjusting the airflow can help optimize spray quality.
6 , variable-speed screw pump, with an output flow rate of 0-8 rise / During operation, simply adjust the return flow rate to achieve the output velocity that meets the building’s requirements.
7. The material to be mixed must be continuously fed into the hopper to ensure uninterrupted spraying. When it is necessary to pause spraying, press the stop button for greater convenience. Remote control can be achieved as follows: turning the middle knob on the electrical box to the left activates manual control.
8. In Waterproof coating sprayer Before completing the operation, after spraying the remaining material from the hopper, shut off the air pump and stop the machine.
9. Remove the spray gun, then disassemble the components and clean them one by one.
10. Fill the hopper with clean water, then press the button to start the pump. Once the water exiting the nozzle becomes clear, press the button to stop, remove the delivery hose, and coil it up.
Related News
View mobile version
Jiangsu Chengye Tools Co., Ltd.
Address: Next door to the east of the Maojiagang Border Police Station, Lüsi Town, Qidong City, Jiangsu Province.
Phone:0513-68039888
Mobile phone:18806285688
Email:phil@chnye.cn
Copyright © 2023 Jiangsu Chengye Tools Co., Ltd.