Airless Sprayer Operation and Maintenance Guide
Release Date:
Sep 08,2020
Airless Sprayer Instructions for Use This equipment must only be operated by trained personnel. You must be fully aware of the hazards associated with the paint being used. If paint is accidentally sprayed onto human skin, seek medical attention immediately. Modifying the equipment or operating it beyond its specified pressure limits is strictly prohibited. Do not allow the cylinder to be subjected to impacts or collisions. If it becomes damaged, stop using it immediately. Static Fire Prevention Comply with all applicable laws and regulations regarding fire safety, electrical safety, and general safety. Remove all sources of ignition, portable electric lamps, and plastic protective covers from within and around the airless sprayer’s spraying area. Airless sprayer spray
Airless sprayer Instructions for Use
This equipment may only be operated by trained personnel.
It is essential to understand the hazards of the paint being used.
If paint is accidentally sprayed onto human skin, seek medical attention immediately.
Any modification to the equipment and operation beyond its design pressure is strictly prohibited.
Collisions and impacts with the cylinder are strictly prohibited. If it is damaged, stop using it immediately.
Static Fire Protection
Comply with all applicable laws and regulations regarding fire safety, electrical safety, and general safety.
Remove Airless sprayer All sources of ignition, portable electric lamps, and plastic protective shields within and around the spray area.
Airless sprayer The spraying area should be well-ventilated to prevent the accumulation of flammable gases from solvents and coatings during the spraying process.
Airless sprayer The spraying area must be equipped with effective fire-extinguishing equipment.
Open flames, welding, smoking, engine starting, and switching electrical equipment—any activities that may generate sparks—are strictly prohibited in the spray‑coating work area.
The equipment must remain properly grounded at all times during operation. If static sparks or electric shocks occur, spraying must be stopped immediately.
Operational Safety Protection
Before spraying, all joints must be carefully inspected and tightened.
Before spraying, the high-pressure hose must be carefully inspected and confirmed to be in good condition. If damaged, they must all be replaced.
Before spraying, carefully inspect and ensure that the spray gun trigger can be operated safely.
Before spraying, you must familiarize yourself with the paint’s technical specifications and ensure that both the paint and the solvent are suitable for the application. Airless sprayer Equipment.
When spraying, it is mandatory to wear safety goggles, gloves, protective clothing, and a respirator that meet applicable health and safety standards.
It is strictly prohibited to aim the spray gun at any part of another person’s body or to place your hand in front of the nozzle.
It is strictly prohibited to use your hands, body, gloves, or rags to stop a leak.
Do not drag the high-pressure hose across narrow spaces, sharp edges, hot surfaces, or under any objects that could crush it.
It is strictly prohibited to twist, excessively bend, or use high-pressure hoses to drag equipment.
Ensure that the inlet pressure gauge displays correctly, and that the inlet pressure downstream of the pressure-reducing valve does not exceed 0.6 MPa.
When stopping spraying, be sure to lock the spray gun trigger and open the sprayer’s drain valve.
It is strictly prohibited to disconnect the paint pump, high-pressure hoses, spray guns, and other connected components while the intake valve is open and pressure has not been relieved.
Airless sprayer After spraying, the sprayer must be cleaned and thoroughly inspected. If any issues are detected, please fix them immediately.
Related News
View mobile version
Jiangsu Chengye Tools Co., Ltd.
Address: Next door to the east of the Maojiagang Border Police Station, Lüsi Town, Qidong City, Jiangsu Province.
Phone:0513-68039888
Mobile phone:18806285688
Email:phil@chnye.cn
Copyright © 2023 Jiangsu Chengye Tools Co., Ltd.